TE0600 Spartan 6 Module Datasheet

Spartan 6 TE0600 Module Spartan 6 TE0600 Block Diagram

Overview

Trenz Electronic GigaBee XC6SLX series are industrial FPGA micromodules integrating a leading-edge Xilinx Spartan-6 LX FPGA, Gigabit ethernet transceiver (physical layer), two independent banks of 16-bit-wide 128 MBytes DDR3 SDRAM (optional 2 x 512 MByte DDR3 SDRAM in 2 banks), 16 MBytes SPI Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/Os is provided via robust board-to-board (B2B) connectors.

All this on a tiny footprint, smaller than a credit card, at the most competitive price.

Sample Applications

  • Cryptographic hardware module
  • Digital signal processing
  • Embedded educational platform
  • Embedded industrial OEM platform
  • Embedded system design
  • Emulation platforms
  • FPGA graphics
  • Image processing
  • IP (intellectual property) cores
  • Low-power design
  • Parallel processing
  • Rapid prototyping
  • Reconfigurable computing
  • System-on-Chip (SoC) development

Key Features

  • High performance Xilinx Spartan-6 LX FPGA, depending on model: LX45, LX100 or LX150
  • FPGA Design Security Solution
  • 10/100/1000 tri-speed GBit Ethernet transceiver (PHY)
  • 2 independent 16-bit-wide 1 GBit (128 MByte) DDR3 SDRAM
    (optional: 2 independent 4 GBit (512 MByte) DDR3 SDRAM in 2 banks)
  • 128 MBit (16 MByte) SPI Flash memory (for configuration and operation)
  • JTAG port (SPI indirect)
  • FPGA configuration through:
    • B2B connector
    • JTAG port
    • SPI Flash memory
  • Plug-on module with 2 × 100-pin high-speed hermaphroditic strips
  • Up to 52 differential, up to 109 single-ended (+1 dual-purpose) FPGA I/O pins available on B2B strips
  • High-efficiency DC-DC switching regulators
  • 125 MHz reference clock signal
  • Single-ended custom oscillator (option)
  • eFUSE bit-stream encryption (LX100 or larger)
  • 1 user LED
  • Evenly-spread supply pins for good signal integrity
  • Other assembly options for cost or performance optimization available upon request.

Specifications

  • Xilinx Spartan-6 LX FPGA (See model overview below)
  • 10/100/1000 GBit Ethernet transceiver (physical layer) Marvell Semiconductor 88E1111
  • 128 MBit (16 MByte) serial Flash memory with dual/quad SPI interface
  • 48-bit node address chip Maxim Integrated Products DS2502-E48 (contains valid MAC adress)
  • 1 KBit Protected 1-Wire EEPROM with SHA-1 Engine Maxim Embedded Security Products DS2432
  • 2 x fine-pitch (0.5 mm) 100-pin high-speed (up to 10.0 GHz / 20 Gbps) hermaphroditic strips LSHM-150-04.0-L-DV-A-S-K-TR
  • Up to 52 differential FPGA input/output pins available on B2B strips
  • Up to 109 single-ended (+1 dual-purpose) FPGA input/output pins available on B2B strips
  • Ethernet (PHY), JTAG and SPI pins available on B2B strips
  • 4.0 A high-efficiency DC-DC switching regulator for power rail 1.2 V
  • 1.5 A high-efficiency DC-DC switching regulator for power rail 1.5 V
  • 2 x 800 mA DC-DC linear regulator for power rails 2.5 V and VCCAUX
  • Processor supervisory circuits with power-fail and watchdog Texas Instruments TPS3705-33
  • 125 MHz clock signal (system + user)
  • Footprint for custom single-ended oscillator (option)
  • Power supply voltage: 3.3 V
  • Dimensions: 50 mm × 40 mm (20 cm²)
  • Stacking hight: 8 mm
  • Maximum height on carrier board surface: 12 mm (standard connectors)
  • Weight: 17.2 ± 0.1 g

Heatsink - Spring-Loaded

Heatsink for TE0600

Made especially for TE0600 board, spring-loaded, weight: 60g

Part No. 26920

Package Content

  • 1 Thermal Pad
  • 4 pressure springs
  • 4 screws

Resources

  • Revision 01 changes to Revision 02, please read the product change notification here.
  • Example projects

Model Overview

Model FPGA SDRAM Temperature Range Price
TE0600-02 XC6SLX45-2FGG484C 2 x 128 MByte 0 - 70°C
TE0600-02I XC6SLX45-2FGG484I 2 x 128 MByte -40 - +85°C
TE0600-02B XC6SLX100-2FGG484C 2 x 128 MByte 0 - 70°C
TE0600-02IVF XC6SLX150-3FGG484I 2 x 128 MByte -40 - +85°C
Optional: All modules are available with 2 x 512 MB SDRAM in 2 banks.  On request only, not normally in stock.
TE0600-02M XC6SLX45-2FGG484C 2 x 512 MByte 0 - 70°C
TE0600-02IM XC6SLX45-2FGG484I 2 x 512 MByte -40 - +85°C
TE0600-02BM XC6SLX100-2FGG484C 2 x 512 MByte 0 - 70°C
TE0600-02IMVF XC6SLX150-3FGG484I 2 x 512 MByte -40 - +85°C

Pricing, Availability and Ordering

  • Concurrent EDA is the US Distributor for Trenz Electronic FPGA Micromodules.
  • Please email Ray at This e-mail address is being protected from spambots. You need JavaScript enabled to view it for pricing and availability.

Contact

Telephone
412.687.8800
Address
5001 Baum Blvd Ste 640
Pittsburgh PA 15213
Email
info@concurrenteda.com